Apalis T30
The Apalis T30 是基于 NVIDIA© Tegra 3 的小封裝計算機模塊。 Cortex A9 四核處理器的主頻能夠高達 1.4 GHz。該模塊能夠提供高性能計算和強大的圖形處理能力,同時維持理想的功耗。模塊具有豐富的高速、先進的接口,如千兆以太網、PCIe 和 SATA 等。
特色
基于 NVIDIA: Tegra 3 四核處理器
The Apalis T30 是基于 NVIDIA© Tegra 3 的小封裝計算機模塊。 Cortex A9 四核處理器的主頻能夠高達 1.4 GHz。該模塊能夠提供高性能計算和強大的圖形處理能力,同時維持理想的功耗。模塊具有豐富的高速、先進的接口,如千兆以太網、PCIe 和 SATA 等。
片上的NVIDIA GPU 能夠支持視覺豐富、平滑和靈敏的用戶界面。

針對苛刻應用的強大圖像處理性能
Apalis T30 使用廣泛的應用,如數字標牌、醫療設備、導航、HMI、航空電子設備、娛樂系統、瘦客戶端、機器人和游戲設備等。
模塊提供大量的接口,從簡單的GPIO,工業標準接口I2C、SPI、UART,到復雜的千兆以太網、PCIe、SATA等。同樣也支持眾多多媒體接口,包括LVDS、HDMI、Digital Audio等。
健壯并且引腳兼容的 Apalis 家族
基于我們的客戶有價值的意見和工程師深入的行業專業知識,Apalis系列為市場帶來了許多新的技術。 Direct Breakout™大大簡化了在底板上的高速信號布線難題。 MXM SnapLock提供了一個獨特的模塊連接器固定結構。 Apalis還配備了成熟的被動式散熱解決方案,可以滿足要求最苛刻的應用。
載板
載板為計算機模塊提供必要的信號和供電。 它還具針對應用的互聯和多媒體接口,例如USB、以太網、UART、HDMI
(1) This temperature range applies excluding the Ethernet connector
配件
Toradex 提供可直接用于最終產品的現成配件。 對于少數配件,可以提供設計文件,包括裝配圖、原理圖和Altium項目。
- Compatible with Apalis T30
- 4 screws (M3x10mm) included with each heatsink for easy mounting to Apalis Carrier Boards
- Additional threaded holes available for attaching fan to the carrier board
- Compatible with Apalis Evaluation Board and Ixora Carrier Board
- CSI and DSI interfaces on one connector
- Push button for Apalis T30 reset
- Touch: 4-Wire Resistive Touch
- 40 pin FFC cable (250mm) to connect it with a Carrier Board
- No special drivers required
- 40 pin and 10 pin FFC cable (250mm) to connect it with a Carrier Board
- Atmel touch driver
- Plug and Play (Windows Compact Embedded 6/7 compatible)
- BPSK, QPSK, 16 QAM, 64 QAM, DBPSK, DQPSK, and CCK modulation schemes
- WEP, TKIP, and AES, WPA, WPA2 hardware encryption Schemes
- Can be setup as a ad-hoc network via peer to peer communications
- Parallel data output format: 8-Bit Parallel ITU-R BT.656 with external HSync and VSync
- No external power supply required
- Compatible with Colibri Evaluation Board and Apalis Evaluation Board
- Power Adapter: 12VDC 30W with international plugs
- Compatible with: Apalis Evaluation Board, Ixora Carrier Board, Colibri Evaluation Board, Iris Carrier Board, Verdin Development Board, Dahlia Carrier Board
- Power Adapter: 12VDC 30W with international plugs
- Compatible with: Apalis Evaluation Board, Ixora Carrier Board, Colibri Evaluation Board, Iris Carrier Board, Verdin Development Board, Dahlia Carrier Board
立刻購買

Small form-factor Apalis Arm Computer Module family Carrier Board
Connectivity: USB 3.0: 2x Host, USB 2.0: 1x Host/ 1x OTG, Gigabit Ethernet, 2x I2C, 1x SPI, 4x PWM, 4x ADC, 2x CAN, 2x LEDs, up to 40 GPIOs
Multimedia: Audio out: 1x (Stereo), Audio in: 1x (Stereo), 1x/ 1x S/PDIF In/ Out, 1x 10 Bit Camera Parallel Interface, 4/5-wire Resistive Touch
Physical: 7-27V DC Supply Voltage, 5V 6A, 3.3V 8A On-Board Power Supplies, Size: 125 x 90 mm
-
數量1-99100-249250-499500-999>999
-
單價US$131.25US$126.00US$118.15US$112.90
現貨

Connectivity: USB 3.0: 1x Host, 1x OTG, USB 2.0: 4x Host, Gigabit Ethernet, 3x I2C, 2x SPI, 4x PWM, 4x ADC, 2x CAN, 8x Switches, 8x LEDs, up to 135 GPIOs
Multimedia: Audio out: 1x (Stereo), Audio in: 1x (Stereo), 1x (Out also on TOSLINK) S/PDIF In/ Out, 1x 8/10/12 Bit Camera Parallel Interface, 4/5-wire Resistive Touch
Physical: 7-27V DC Supply Voltage, 5V 5A, 3.3V 5A On-Board Power Supplies, Size: 250 x 250 mm
-
數量>0
-
單價US$325.00
庫存緊張

Heatsink for Apalis T30 module
Compatible with Apalis T30. 4 screws (M3x10mm) included with each heatsink for easy mounting to Apalis Carrier Boards. Additional threaded holes available for attaching fan to the carrier board. -40°C to +200°C Temp.
-
數量1-99100-249250-499500-999>999
-
單價US$12.45US$12.00US$11.25US$10.75
現貨

Heatsink Fan is compatible with all Apalis Heatsink types and plug-and-play with Apalis Evaluation Board and Ixora Carrier board.
The fan is intended for development and evaluation purposes only.
Compatible with Apalis Evaluation Board and Ixora Carrier Board.
-
數量>0
-
單價US$19.90
現貨

Mezzanine board for Apalis T30 module
CSI and DSI interfaces on one connector. Push button for Apalis T30 reset, Range. Size: 100 x 60 mm.
-
數量>0
-
單價US$52.50
現貨

Resistive Touch Displays it for Apalis & Colibri modules
Touch: 4-Wire Resistive Touch. 40 pin FFC cable (250mm) to connect it with a Carrier Board. No special drivers required. -20° to +70° C Temp, Range. Size: 164.9 x 100.0 x 13.0 mm.
-
數量>0
-
單價US$98.50
現貨

Capacitive Touch Displays for Apalis & Colibri modules
40 pin and 10 pin FFC cable (250mm) to connect it with a Carrier Board. Atmel touch driver. -20° to +70° C Temp, Range. Size: 173 x 112 x 13 mm.
-
數量>0
-
單價US$119.50
現貨

LM816 USB WiFi for Apalis and Colibri Family
Plug and Play (Windows Compact Embedded 6/7 compatible). BPSK, QPSK, 16 QAM, 64 QAM, DBPSK, DQPSK, and CCK modulation schemes. WEP, TKIP, and AES, WPA, WPA2 hardware encryption Schemes. Can be setup as a ad-hoc network via peer to peer communications. -10°C to +60°C Temp, Range. Size: 17 x 15 x 8 mm.
-
數量1-99100-249250-499>499
-
單價US$25.00US$20.80US$19.40
現貨

Analogue Camera Adapter for Apalis & Colibri modules
Parallel data output format: 8-Bit Parallel ITU-R BT.656 with external HSync and VSync. No external power supply required. Compatible with Colibri Evaluation Board and Apalis Evaluation Board. -10°C to +60°C Temp, Range. Size: 60 x 50 x 9.4 mm.
-
數量>0
-
單價US$49.90
現貨